Crafters Companion

Crafters Companion - Gemini GO Machine - GEMGO-M-GLO - It is compatible with most thin metal dies and embossing folders - It has a platform size of 3" x 6" - It uses higher pressure than many other die-cutting and embossing machines - For ultimate portability, the Gemini GO can be operated with a 12v, 1.5A, 10,000MAH min. battery pack using the Gemini GO Battery Booster Cable (sold separately) The Gemini machine is faster, lighter and quieter than other die-cutting machines and has a sleek, low-profile design. It has been designed for intricate dies as well as for cutting heavyweight cardstock, vinyl, foil and multiple layers for fabric (depending on the dies used). It uses higher pressure than many other die-cutting and embossing machines allowing better cutting of elaborate designs. It has the facility to pause, resume and reverse the plates within the machine. It has a platform size which is 3" x 6" so you can cut multiple dies at one time. It is also compatible with most thin metal dies and embossing folders. For ultimate portability, the Gemini Go can be operated with a 12V, 1.5A battery pack using the Gemini Go Battery Booster Cable (sold separately). This machine has the same performance as the Gemini machine just in a portable format. Each Gemini Go Machine includes: 1 x Gemini Go machine 1 x power cord 1 x clear plate @ 3” x 6” 1 x purple plate @ 3” x 6” 1 x magnetic shim @ 3” x 6” 1 x rubber embossing mat @ 3” x 6” 1 x plastic shim @ 3” x 6” 1 x metal shim @ 3” x 6” 1 x user guide CAUTION: the edges on the metal shim may be sharp - we do not recommend that it is used by children under the age of 14

Pack includes 3 metal dies Die sizes are approx from 5 x 1.7"(12.7 x 4.3cm) to 5.2in x 1.9in (13.2cm x 4.8cm) Perfect finish to any crafting project These Gemini Edge'ables Dies are beautiful defined designs combined with deep, embossed detailing to create a fabulous contrast to the delicately-intricate designs. The bold designs enable these dies to be used as the 'standing edges' for your card design. These can be used in a variety of ways: - Cut in as a standard decorative element, making them perfect for invitations, table plans, menus etc. Looks fabulous when used with a simple bold sentiment or stamped image! - Cut out the Ornate Edge'able using both of the frame dies to create a fabulous stand-alone topper. Add dimension to your card creations by placing the die-cut Ornate Edge'able topper anywhere on your card design. This is perfect for creating a decorative stopper panel for an easel card. Use inkpads and embossing powders to create an opulent finish, or highlight the embossed detail using inkpads or gilding wax. - Cut out with the top half of the frame dies for a traditional Edge'able effect. Great for adding a perfect decorative edge to stepper cards. These would be perfect for wedding cards, dinner parties etc.

Pack includes 3 metal dies Die sizes are approx from 5 x 1.7"(12.7 x 4.3cm) to 5.2in x 1.9in (13.2cm x 4.8cm) Perfect finish to any crafting project These Gemini Edge'ables Dies are beautiful defined designs combined with deep, embossed detailing to create a fabulous contrast to the delicately-intricate designs. The bold designs enable these dies to be used as the 'standing edges' for your card design. These can be used in a variety of ways: - Cut in as a standard decorative element, making them perfect for invitations, table plans, menus etc. Looks fabulous when used with a simple bold sentiment or stamped image! - Cut out the Ornate Edge'able using both of the frame dies to create a fabulous stand-alone topper. Add dimension to your card creations by placing the die-cut Ornate Edge'able topper anywhere on your card design. This is perfect for creating a decorative stopper panel for an easel card. Use inkpads and embossing powders to create an opulent finish, or highlight the embossed detail using inkpads or gilding wax. - Cut out with the top half of the frame dies for a traditional Edge'able effect. Great for adding a perfect decorative edge to stepper cards. These would be perfect for wedding cards, dinner parties etc.

Pack includes 3 metal dies Die sizes are approx from 5 x 1.7"(12.7 x 4.3cm) to 5.2in x 1.9in (13.2cm x 4.8cm) Perfect finish to any crafting project These Gemini Edge'ables Dies are beautiful defined designs combined with deep, embossed detailing to create a fabulous contrast to the delicately-intricate designs. The bold designs enable these dies to be used as the 'standing edges' for your card design. These can be used in a variety of ways: - Cut in as a standard decorative element, making them perfect for invitations, table plans, menus etc. Looks fabulous when used with a simple bold sentiment or stamped image! - Cut out the Ornate Edge'able using both of the frame dies to create a fabulous stand-alone topper. Add dimension to your card creations by placing the die-cut Ornate Edge'able topper anywhere on your card design. This is perfect for creating a decorative stopper panel for an easel card. Use inkpads and embossing powders to create an opulent finish, or highlight the embossed detail using inkpads or gilding wax. - Cut out with the top half of the frame dies for a traditional Edge'able effect. Great for adding a perfect decorative edge to stepper cards. These would be perfect for wedding cards, dinner parties etc.

Pack includes 3 metal dies Die sizes are approx from 5 x 1.7"(12.7 x 4.3cm) to 5.2in x 1.9in (13.2cm x 4.8cm) Perfect finish to any crafting project These Gemini Edge'ables Dies are beautiful defined designs combined with deep, embossed detailing to create a fabulous contrast to the delicately-intricate designs. The bold designs enable these dies to be used as the 'standing edges' for your card design. These can be used in a variety of ways: - Cut in as a standard decorative element, making them perfect for invitations, table plans, menus etc. Looks fabulous when used with a simple bold sentiment or stamped image! - Cut out the Ornate Edge'able using both of the frame dies to create a fabulous stand-alone topper. Add dimension to your card creations by placing the die-cut Ornate Edge'able topper anywhere on your card design. This is perfect for creating a decorative stopper panel for an easel card. Use inkpads and embossing powders to create an opulent finish, or highlight the embossed detail using inkpads or gilding wax. - Cut out with the top half of the frame dies for a traditional Edge'able effect. Great for adding a perfect decorative edge to stepper cards. These would be perfect for wedding cards, dinner parties etc.

Pack includes 3 metal dies Die sizes are approx from 5 x 1.7"(12.7 x 4.3cm) to 5.2in x 1.9in (13.2cm x 4.8cm) Perfect finish to any crafting project These Gemini Edge'ables Dies are beautiful defined designs combined with deep, embossed detailing to create a fabulous contrast to the delicately-intricate designs. The bold designs enable these dies to be used as the 'standing edges' for your card design. These can be used in a variety of ways: - Cut in as a standard decorative element, making them perfect for invitations, table plans, menus etc. Looks fabulous when used with a simple bold sentiment or stamped image! - Cut out the Ornate Edge'able using both of the frame dies to create a fabulous stand-alone topper. Add dimension to your card creations by placing the die-cut Ornate Edge'able topper anywhere on your card design. This is perfect for creating a decorative stopper panel for an easel card. Use inkpads and embossing powders to create an opulent finish, or highlight the embossed detail using inkpads or gilding wax. - Cut out with the top half of the frame dies for a traditional Edge'able effect. Great for adding a perfect decorative edge to stepper cards. These would be perfect for wedding cards, dinner parties etc.

Crafters Companion Embossing Folders offer wonderful definition and charming designs to your craft work. This embossing folder will print onto card or paper up to 5 X 7 inches and is compatible with almost all leading die cutting and embossing machines. If you'd like to check that your machine is compatible, please feel free to call our friendly customer services team on 01271 326777.

Crafters Companion - Clevercut Replacement Blade Unit - CLEVER-BLADE This Original Replacement Cutting Cartridge for the Clevercut is available with straight, wave, perforated and score cutting blades. Easy to change, you simply slide out the metal retaining bar and swap the blade unit. These replacement blades will ensure your 5-in-1 paper trimmer will be cutting for many years to come.

Crafters Companion - Die & Storage Folder - Large - CC-STOR-DIE-L This folder will hold panels which are 8.5" x 11" (28cm x 21.6cm) Keep your metal dies and stamps together with this handy storage binder This Crafter's Companion Die & Stamp Storage Folder is the perfect storage solution for your metal dies and stamps. Keep them all together in one place with this handy storage folder, you can even take it with you on the go. This will not only save you time looking for your metal dies and stamps but it will allow more time for crafting!

Crafters Companion Die & Stamp Storage Folder - Small - CC-STOR-DIE-S This folder will hold panels which are 8.25" x 5.5" (21cm x 14cm) Keep your metal dies and stamps together with this handy storage binder This Crafter's Companion Die & Stamp Storage Folder is the perfect storage solution for your small dies and stamps. Keep them all together in one place with this handy storage folder, you can even take it with you on the go. This will not only save you time looking for your metal dies and stamps but it will allow more time for crafting!

PRE ORDER FOR 17TH MARCH DISPATCH - Crafters Companion Card Base Dies - Louise DS-CAD-LOU Use this new Crafter Companion base die to create effortless craft projects. This die is perfect for card making, scrapbook and many more crafts. 6 Metal dies in 6 different sizes! This Crafters Companion Base Die Louise is wafer-thin so it can be stored easily. The largest die in this set measures 4.5” x 5.9” (116mm x 150mm) This Crafters Companion Card Base Louise die is compatible with all leading die cutting systems including Sizzix Big Shot, Tonic Tangerine, Spellbinders Platinum, Grand Calibur and Many More…

Crafters Companion Card Base Dies - Ruth DS-CAD-ROS Use this new Crafter Companion base die to create effortless craft projects. This die is perfect for card making, scrapbook and many more crafts. 6 Metal dies in 6 different sizes! This Crafters Companion Base Die Ruth is wafer-thin so it can be stored easily. The largest die in this set measures 4.5” x 5.9” (116mm x 150mm) This Crafters Companion Card Base Ruth die is compatible with all leading die cutting systems including Sizzix Big Shot, Tonic Tangerine, Spellbinders Platinum, Grand Calibur and Many More…

Use this new Crafter Companion base die to create effortless craft projects. This die is perfect for card making, scrapbook and many more crafts. 6 Metal dies in 6 different sizes! This Crafters Companion Base Die Stacey is wafer-thin so it can be stored easily. The largest die in this set measures 4.5” x 5.9” (116mm x 150mm) This Crafters Companion Card Base Stacey die is compatible with all leading die cutting systems including Sizzix Big Shot, Tonic Tangerine, Spellbinders Platinum, Grand Calibur and Many More…

Crafters Companion - Diesire Classiques - Alphabet Contemporary Uppercase Die Set - DS-C-1UP-CON These are the wonderful new Classique die sets from Crafters Companion, each set is available in either a contemporary or decorative design. This Is a contemporary die set which means that the font and design is more formal, this set is perfect for creating sentiments and special little messages to family and friends. Both the contemporary and decorative design come in a range of sets (Lowercase, Uppercase And Punctuation & Numbers). Each letter measures 1”.

Crafters Companion - Classiques - Alphabet Decorative Uppercase Die Set - DS-C-1UP-DEC These are the wonderful new Classique die sets from Crafters Companion, each set is available in either a contemporary or decorative design. This Is a decorative die set which means that the font and design is more intricate and subtle than the contemporary’s design, this set is perfect for creating sentiments and special little messages to family and friends. Both the contemporary and decorative design come in a range of sets (Lowercase, Uppercase And Punctuation & Numbers). Each letter measures 1”.

Crafters Companion 8x8 Create A Card Die - Daisy Dreams - DS-CAD8-DDRE New to the Die'sire collection. This 8 x 8 create a card birthday flowers can be used for all sorts of craft projects such as card making, scrapbooking and many more. The metal die is Wafter-thin which makes it easier to store. This die is compatible with all leading die cutting systems including Sizzix Big Shot, Tonic Tangerine, Spellbinders Platinum, Grand Calibur and Many More…

Diesire Create-A-Card Metal Die - Bauble Accordion - DS-CADA-BAUB Create Gorgeous 3D cards with these new Diesire dies by Crafters Companion. These dies will create a gorgeous 3 Dimensional card that you can decorate over different tiers. Use the Crafters Companion overlay dies in order to decorate and create gorgeous patterns to tie in with you new Accordion card.

Diesire Create-A-Card Metal Die - Christmas Cracker Accordion - DS-CADA-CCRA Create Gorgeous 3D cards with these new Diesire dies by Crafters Companion. These dies will create a gorgeous 3 Dimensional card that you can decorate over different tiers. Use the Crafters Companion overlay dies in order to decorate and create gorgeous patterns to tie in with you new Accordion card.