Craft Storage Solutions

DCE105901 - Docrafts A5 Stamp Pockets This pack contains 6 A5 Stamp storage pockets for the Creativity Essentials Stamp Storage Folder. (Sold Separately - Product No. DCE907100).

DCE105902 - Docrafts A6 Stamp Pockets This pack contains 6 A6 Stamp storage pockets for the Creativity Essentials Stamp Storage Folder. (Sold Separately - Product No. DCE907100).

Crafters Companion - Die & Storage Folder - Large - CC-STOR-DIE-L This folder will hold panels which are 8.5" x 11" (28cm x 21.6cm) Keep your metal dies and stamps together with this handy storage binder This Crafter's Companion Die & Stamp Storage Folder is the perfect storage solution for your metal dies and stamps. Keep them all together in one place with this handy storage folder, you can even take it with you on the go. This will not only save you time looking for your metal dies and stamps but it will allow more time for crafting!

Crafters Companion Die & Stamp Storage Folder - Small - CC-STOR-DIE-S This folder will hold panels which are 8.25" x 5.5" (21cm x 14cm) Keep your metal dies and stamps together with this handy storage binder This Crafter's Companion Die & Stamp Storage Folder is the perfect storage solution for your small dies and stamps. Keep them all together in one place with this handy storage folder, you can even take it with you on the go. This will not only save you time looking for your metal dies and stamps but it will allow more time for crafting!

Craftt Devils - Clear Plastic Storage Pots - 200ml Capacily (Pack of 100 Pots) 1048T Multipurpose plastic storage pots with screw top lids, ideal for storing glitter, gilding flakes, gemstones, other smaller crafting embellishments or even some of your non-crafting bits and bobs! Our storage jars are beautifully made of high-quality crystal clear PET plastic, practical not only for the craft room but other areas of the house too! Pot Information; Neck Size - 70-400 Wall Type - Single Wall Finish - Smooth Capacity - 200ml Material - PET Colour - Clear Fully Recycleable Lid Information; Neck Size - 70-400 Model - Straight Finish - Smooth Closing - Crab's Claw Material - PP Colour - Black Fully Recycleable Pack of 100 Pots. Each Pot Will Hold 200ml.

Craftt Devils - Clear Plastic Storage Pots - 200ml Capacily (Pack of 10 Pots) 1047T Multipurpose plastic storage pots with screw top lids, ideal for storing glitter, gilding flakes, gemstones, other smaller crafting embellishments or even some of your non-crafting bits and bobs! Our storage jars are beautifully made of high-quality crystal clear PET plastic, practical not only for the craft room but other areas of the house too! Pot Information; Neck Size - 70-400 Wall Type - Single Wall Finish - Smooth Capacity - 200ml Material - PET Colour - Clear Fully Recycleable Lid Information; Neck Size - 70-400 Model - Straight Finish - Smooth Closing - Crab's Claw Material - PP Colour - Black Fully Recycleable Pack of 10 Pots. Each Pot Will Hold 200ml.

Craftt Devils - Clear Plastic Storage Pot - 200ml Capacily (Single) 1046T Multipurpose plastic storage pot with screw top lid, ideal for storing glitter, gilding flakes, gemstones, other smaller crafting embellishments or even some of your non-crafting bits and bobs! Our storage jars are beautifully made of high-quality crystal clear PET plastic, practical not only for the craft room but other areas of the house too! Pot Information; Neck Size - 70-400 Wall Type - Single Wall Finish - Smooth Capacity - 200ml Material - PET Colour - Clear Fully Recycleable Lid Information; Neck Size - 70-400 Model - Straight Finish - Smooth Closing - Crab's Claw Material - PP Colour - Black Fully Recycleable Single Pot. This Pot Will Hold 200ml.

Crafty Devils - MDF Storage - A4 Card Stock Storage - Starter Set (Base, Top & Tray) - 1103C This kit allows you to build a 3 level stackable storage tower for A4 cardstock. Additional middle trays are available seperately (1102C). The kit contains: 1 Base Unit, 1 Top Tray, 1 Middle Tray. Unit comes uncoated and ready to decorate, decorate after assembly where possible. Base Of Unit (Footprint) Length - 268mm ( 10.55" ) Width - 220mm ( 8.66" ) Height (3 Units Stacked Together) - 290mm ( 11.42" ) Inside Area Of Each Tray Length - 304mm ( 11.97" ) Width - 222mm ( 8.72" ) This unit comes as a kit and requires assembling at home., a test dry assembly before gluing is recommended where possible. Please note: You will need PVA or wood glue to assemble this kit which are sold separately, we recommed our Crafty Devils MDF Glue - Available in 60ml, 120ml and 240ml bottles. We would also recommend having some cello tape handy, to hold the pieces together whilst the glue dries. Difficulty Level - EASY Estimated Time To Assemble Each Ellement (excl. drying time) - < 5 Minutes. Here at Crafty Devils, we stock an incredible range of products; all of which have been designed and precision laser cut in house in our Barnstaple North Devon warehouse! All of our products are cut from a high-quality 3mm thick medite MDF, ranging from small decorative embellishments to gift boxes, art boards, easels and more! We're sure to have everything you need! Each of our MDF products comes uncoated and ready to decorate. Before decorating, we recommend priming your MDF surface for a professional finish to all of your products. We have an unbelievable selection of mixed media products available to decorate your new MDF products with, why not try priming your surface with our Black & White Acrylic Based Gesso to make your products go further? Bought one of our Kits? We also have a specially formulated MDF Wood Glue available! Perfect for assembling our MDF storage units, craft kits and other MDF, hobby craft and DIY projects. Setting within an hour, and completely dry within 24 hours or less dependent on amount of glue used, this glue dries quickly, however you do have time to reposition if need be. We don't have what you're looking for? Get in touch and let us know! We're always looking for new ideas for products to create for the masses! Contact us at enquiries@craftydevilspapercraft.co.uk or give us a call on 01271326777, where a member of our team will be more than happy to assist you.

Crafty Devils - MDF Storage - A4 Card Stock Storage - Additional Tray - 1102C This kit allows you to make a tray to store A4 size cardstock. This tray can be used on it's own but has been designed to stack with the A4 Card Stock Tray Base Set (1103C). Unit comes uncoated and ready to decorate, decorate after assembly where possible. Unit Length - 307mm ( 12.09” ) Unit Width – 222mm ( 8.74” ) Unit Height – 64mm ( 2.52” ) This unit comes as a kit and requires assembling at home, a test dry assembly before gluing is recommended where possible. Please note: You will need PVA or wood glue to assemble this kit which are sold separately, we recommed our Crafty Devils MDF Glue - Available in 60ml, 120ml and 240ml bottles. We would also recommend having some cello tape handy, to hold the pieces together whilst the glue dries. Difficulty Level - EASY Estimated Time To Assemble (excl. drying time) - < 5 Minutes. Here at Crafty Devils, we stock an incredible range of products; all of which have been designed and precision laser cut in house in our Barnstaple North Devon warehouse! All of our products are cut from a high-quality 3mm thick medite MDF, ranging from small decorative embellishments to gift boxes, art boards, easels and more! We're sure to have everything you need! Each of our MDF products comes uncoated and ready to decorate. Before decorating, we recommend priming your MDF surface for a professional finish to all of your products. We have an unbelievable selection of mixed media products available to decorate your new MDF products with, why not try priming your surface with our Black & White Acrylic Based Gesso to make your products go further? Bought one of our Kits? We also have a specially formulated MDF Wood Glue available! Perfect for assembling our MDF storage units, craft kits and other MDF, hobby craft and DIY projects. Setting within an hour, and completely dry within 24 hours or less dependent on amount of glue used, this glue dries quickly, however you do have time to reposition if need be. We don't have what you're looking for? Get in touch and let us know! We're always looking for new ideas for products to create for the masses! Contact us at enquiries@craftydevilspapercraft.co.uk or give us a call on 01271326777, where a member of our team will be more than happy to assist you.

Crafty Devils - MDF Storage - Table Tidy 1104C Multipurpose desktop table tidy. Pefect for storing, nuvo drops, pens, paper, card, scissors, rulers, and MORE! Side pieces can be attached either vertically or horizontally for multiple storage options. Product comes uncoated and ready to decorate, decorate after assembly where possible. Approximate External Dimensions of Finished Unit Width - 437mm ( 17.20" ) Hight - 200mm ( 7.87" ) Depth - 215mm ( 8.46" ) Storage Holes Diameter - 31mm ( 1.22" ) This unit comes as a kit and requires assembling at home. Instructions are included, a test dry assembly before gluing is recommended where possible. Please note: You will need PVA or wood glue to assemble this kit which are sold separately, we recommed our Crafty Devils MDF Glue - Available in 60ml, 120ml and 240ml bottles. We would also recommend having some cello tape handy, to hold the pieces together whilst the glue dries. Difficulty Level - COMPLEX Estimated Time To Assemble (excl. drying time) - 25 Minutes. Here at Crafty Devils, we stock an incredible range of products; all of which have been designed and precision laser cut in house in our Barnstaple North Devon warehouse! All of our products are cut from a high-quality 3mm thick medite MDF, ranging from small decorative embellishments to gift boxes, art boards, easels and more! We're sure to have everything you need! Each of our MDF products comes uncoated and ready to decorate. Before decorating, we recommend priming your MDF surface for a professional finish to all of your products. We have an unbelievable selection of mixed media products available to decorate your new MDF products with, why not try priming your surface with our Black & White Acrylic Based Gesso to make your products go further? Bought one of our Kits? We also have a specially formulated MDF Wood Glue available! Perfect for assembling our MDF storage units, craft kits and other MDF, hobby craft and DIY projects. Setting within an hour, and completely dry within 24 hours or less dependent on amount of glue used, this glue dries quickly, however you do have time to reposition if need be. We don't have what you're looking for? Get in touch and let us know! We're always looking for new ideas for products to create for the masses! Contact us at enquiries@craftydevilspapercraft.co.uk or give us a call on 01271326777, where a member of our team will be more than happy to assist you.

Crafty Devils - MDF Storage System - Ink Pads DEW DROP 1105C Product comes uncoated and ready to decorate, decorate after assembly where possible. The kit contains all of the pieces and instructions to build a storage rack for up to 48 Dew Drop ink pads. Perfect fit for the following brands AND MORE!: - Brilliance Dew Drop Ink Pads - Memento Dew Drop Ink Pads - VersaMagic Dew Drop Ink Pads If you're unsure if your ink pads will fit our unit, then please contact our team, who will be more than happy to assist you. We recommend ink pads to be no more than 45mm long x 33mm wide. Unit measures - Width - 312mm ( 12.28" ) Depth - 60mm ( 2.36" ) Height - 220mm ( 8.66" ) Please note that the height measurement excludes the small tabs and peak on the top of the unit, that are in place to hold the unit steady when stacking with our other units. This fantastic stackable storage rack has been cleverly made using a modular design that allows it to interlock with all of our other storage rack designs. This means you can create a storage wall for all your favourite crafting tools and materials, stacking them up one on top of the other. All stackable units come with a pre-cut 10mm tear drop hole in the backboard so that you can affix them to a wall if you desire. This unit comes as a kit and requires assembling at home. Instructions are included, a test dry assembly before gluing is recommended where possible. Please note: You will need PVA or wood glue to assemble this kit which are sold separately, we recommed our Crafty Devils MDF Glue - Available in 60ml, 120ml and 240ml bottles. We would also recommend having some cello tape handy, to hold the pieces together whilst the glue dries. Difficulty Level - EASY Estimated Time To Assemble (excl. drying time) - 20 Minutes. Here at Crafty Devils, we stock an incredible range of products; all of which have been designed and precision laser cut in house in our Barnstaple North Devon warehouse! All of our products are cut from a high-quality 3mm thick medite MDF, ranging from small decorative embellishments to gift boxes, art boards, easels and more! We're sure to have everything you need! Each of our MDF products comes uncoated and ready to decorate. Before decorating, we recommend priming your MDF surface for a professional finish to all of your products. We have an unbelievable selection of mixed media products available to decorate your new MDF products with, why not try priming your surface with our Black & White Acrylic Based Gesso to make your products go further? Bought one of our Kits? We also have a specially formulated MDF Wood Glue available! Perfect for assembling our MDF storage units, craft kits and other MDF, hobby craft and DIY projects. Setting within an hour, and completely dry within 24 hours or less dependent on amount of glue used, this glue dries quickly, however you do have time to reposition if need be. We don't have what you're looking for? Get in touch and let us know! We're always looking for new ideas for products to create for the masses! Contact us at enquiries@craftydevilspapercraft.co.uk or give us a call on 01271326777, where a member of our team will be more than happy to assist you.

Crafty Devils - MDF Storage System - Ink Pads Distress / Oxide 1106C Product comes uncoated and ready to decorate, decorate after assembly where possible. An ideal storage rack, specifically designed to hold 24 Tim Holtz Ink Pads and up to 12 of their corresponding Re-Inkers. We recommend the largest ink pads for this unit to be up to 75mm wide and up to 18mm thick. External Dimensions; Width - 312mm ( 12.28" ) Depth - 60mm ( 2.36" ) Height - 245mm ( 9.65" ) Please note that the height measurement excludes the small tabs and peak on the top of the unit, that are in place to hold the unit steady when stacking with our other units. Internal Dimensions; Ink Pad Shelf Width - 79mm ( 3.11" ) Ink Pad Shelf Depth - 57mm ( 2.24" ) Ink Pad Shelf Height - 22mm ( 0.87" ) Re-Inker Holes Diameter - 26mm ( 1.02" ) This fantastic stackable storage rack has been cleverly made using a modular design that allows it to interlock with all of our other storage rack designs. This means you can create a storage wall for all your favourite crafting tools and materials, stacking them up one on top of the other. All stackable units come with a pre-cut 10mm tear drop hole in the backboard so that you can affix them to a wall if you desire. This unit comes as a kit and requires assembling at home. Instructions are included, a test dry assembly before gluing is recommended where possible. Please note: You will need PVA or wood glue to assemble this kit which are sold separately, we recommed our Crafty Devils MDF Glue - Available in 60ml, 120ml and 240ml bottles. We would also recommend having some cello tape handy, to hold the pieces together whilst the glue dries. Difficulty Level - EASY Estimated Time To Assemble (excl. drying time) - 25 Minutes. Here at Crafty Devils, we stock an incredible range of products; all of which have been designed and precision laser cut in house in our Barnstaple North Devon warehouse! All of our products are cut from a high-quality 3mm thick medite MDF, ranging from small decorative embellishments to gift boxes, art boards, easels and more! We're sure to have everything you need! Each of our MDF products comes uncoated and ready to decorate. Before decorating, we recommend priming your MDF surface for a professional finish to all of your products. We have an unbelievable selection of mixed media products available to decorate your new MDF products with, why not try priming your surface with our Black & White Acrylic Based Gesso to make your products go further? Bought one of our Kits? We also have a specially formulated MDF Wood Glue available! Perfect for assembling our MDF storage units, craft kits and other MDF, hobby craft and DIY projects. Setting within an hour, and completely dry within 24 hours or less dependent on amount of glue used, this glue dries quickly, however you do have time to reposition if need be. We don't have what you're looking for? Get in touch and let us know! We're always looking for new ideas for products to create for the masses! Contact us at enquiries@craftydevilspapercraft.co.uk or give us a call on 01271326777, where a member of our team will be more than happy to assist you.